Nkọwa ngwaahịa
bolts Hub bụ bolts nwere ike dị elu nke jikọtara ụgbọ ala na wiil. Ebe njikọ ahụ bụ oghere oghere nke wheel! Na mkpokọta, a na-eji klas 10.9 maka ụgbọ ala ndị pere mpe, a na-eji klas 12.9 maka ụgbọ ala buru ibu! Nhazi nke bolt hub bụ faịlụ igodo akpọchiri akpọchi yana faịlụ eried! Na isi okpu! Ọtụtụ n'ime ihe mkpuchi wiil isi T dị n'elu ọkwa 8.8, nke na-ebu nnukwu njikọ njikọ dị n'etiti wiil ụgbọ ala na axle! Ọtụtụ n'ime ihe mkpuchi wiil nwere isi abụọ dị n'elu ọkwa 4.8, nke na-enwe njikọ ọkụ ọkụ n'etiti shea wheel hub na mpụta na taya.
Usoro nrụpụta nke nnukwu ike bolts
1. Spheroidizing annealing nke elu-ike bolts
Mgbe a na-emepụta oghere isi hexagon site na usoro isiokwu oyi, nhazi mbụ nke ígwè ahụ ga-emetụta kpọmkwem ike ịmepụta n'oge nhazi isi oyi. Ya mere, ígwè ahụ aghaghị inwe ezigbo plasticity. Mgbe ihe mejupụtara kemịkalụ nke ígwè ahụ na-adịgide adịgide, nhazi metallographic bụ isi ihe na-ekpebi plasticity. A na-ekwenyekarị na pearlite na-adịghị ahụkebe adịghị akwado isi okwu oyi, ebe ọmarịcha pearlite nwere ike imeziwanye ikike nrụrụ plastik nke ígwè.
N'ihi na ọkara carbon ígwè na ọkara carbon alloy ígwè na nnukwu ego nke elu-ike fasteners, spheroidizing annealing a rụrụ tupu oyi aga, nke mere na-enweta edo na ezi spheroidized pearlite ka mma izute n'ezie mmepụta mkpa.
Ọkọlọtọ mma nke Hub anyị
10.9 oghere oghere
| isi ike | 36-38HRC |
| ike ọdụdọ | ≥ 1140MPa |
| Ibu Tensile kacha | ≥ 346000N |
| Ngwakọta kemịkalụ | C: 0.37-0.44 Si: 0.17-0.37 Mn: 0.50-0.80 C: 0.80-1.10 |
12.9 oghere oghere
| isi ike | 39-42HRC |
| ike ọdụdọ | ≥ 1320MPa |
| Ibu Tensile kacha | ≥406000N |
| Ngwakọta kemịkalụ | C: 0.32-0.40 Si: 0.17-0.37 Mn: 0.40-0.70 Cr: 0.15-0.25 |
FAQ
1.Olee otú iji nyefee ngwongwo?
A. Nyefee site na akpa ma ọ bụ site na LCL
2.Ị nwere ike ịnakwere usoro ịkwụ ụgwọ L / C?
A.nwere ike imekọ ihe ọnụ site na usoro ịkwụ ụgwọ TT,.L/C na D/P
3.Gịnị mere ịhọrọ anyị?
A. Anyị bụ ndị nrụpụta, anyị nwere uru ọnụahịa
B.Anyị nwere ike ịkwado àgwà ahụ
4.Gịnị bụ isi ahịa gị?
Europe, America, Ndịda Ebe Ọwụwa Anyanwụ Aisa, Middle East, Africa ETC.
5. Kedu ọkwa nke ngwaahịa gị?
A. hardness bụ 36-39, ike ike bụ 1040Mpa
B.Grade bụ 10.9
6. Gịnị bụ mmepụta gị kwa afọ?
18000000 PCS maka mmepụta kwa afọ.
7.Ole ndị ọrụ ụlọ ọrụ gị nwere?
200-300affs anyị nwere
8. Kedu mgbe ụlọ ọrụ mmepụta ihe gị chọtara?
Factory e tọrọ ntọala na 1998, na ihe karịrị 20 afọ ahụmahụ
